Wirtgen · Cold Milling Machines
Wirtgen W 100 HR
Also available as W 50 HR, W 130 HR, W 55 HR
- 1,000 mm
- Milling Width
- 13,600 kg
- Operating Weight
- 200 mm
- Max Milling Depth
- 155 kW
- Engine Power
The Wirtgen W 50 HR is a small-class cold milling machine featuring a high-discharge conveyor for direct truck loading, a compact tracked chassis, and a narrow milling drum designed for precision surface removal on tight or smaller road maintenance projects.
Wirtgen W 50 HR
Compact high performance rear loader with a 500 mm drum, for patch repairs, trenches and small scale rehabilitation.
- 500 mm
- Milling Width
- 5,750 kg
- Operating Weight
- 180 mm
- Max Milling Depth
- 86 kW
- Engine Power
Talk to a specialist
Add W 50 HR and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Wirtgen W HR Series
4 builds, differing by milling width and duty
Milling Width: 500 mm, 1,000 mm, 1,300 mm, 500 mm. Operating Weight: 5,750 kg, 13,600 kg, 14,100 kg, 6,800 kg
500 mm width, optimised for advance rate
Shallower cut, faster clearance
Compact for confined urban sites
Light transport weight
Compact high performance rear loader with a 500 mm drum, for patch repairs, trenches and small scale rehabilitation.
The HR series trades some depth capability for advance rate. Where the R series is chosen for how deep it can cut, the HR is chosen for how fast it clears area at shallower depth, which is what surface layer removal and reclaimed asphalt recovery actually need.
Key Features
- 500 mm width, optimised for advance rate
- Shallower cut, faster clearance
- Compact for confined urban sites
- Light transport weight
At a Glance
- Milling Width
- 500 mm
- Operating Weight
- 5,750 kg
- Max Milling Depth
- 180 mm
- Engine Power
- 86 kW
About Wirtgen: Cold milling machines for surface layer removal, full depth rehabilitation and fine milling, supplied through Wirtgen India.
View the full Wirtgen rangeFull technical data for the W 50 HR. These figures also power the catalogue filters, so what you filter on is what is shown here.
Engine & Power
| Engine Power (kW) | 86 kW |
|---|---|
| Emission Standard | CEV Stage V |
Weight & Dimensions
| Operating Weight (kg) | 5,750 kg |
|---|
Milling Performance
| Milling Width (mm) | 500 mm |
|---|---|
| Max Milling Depth (mm) | 180 mm |
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Urban Roads & Streets
Best matchCity streets, lanes and confined urban sites where compact machines and manoeuvrability matter more than output.
92% fit
Road Rehabilitation
Strong matchMilling out failed layers and rebuilding existing roads, including cold recycling in place.
85% fit
Documentation for the W 50 HR. The spec sheet is generated from the same data as this page, so it can never contradict it.
W 50 HR Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the W 50 HR, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
WIR-017Carry a spareDrive belt set, engine to pumpEngine to hydraulic pump transmissionWIR-020Carry a spareChassis grease, lithium EP2Drum lift, tracks, chassis linkageWIR-012Carry a spareEngine oil, 15W-40 dieselDiesel engine, per service intervalWIR-015Carry a spareHydraulic oil, HVLP 46Propulsion, levelling and drum lift hydraulicsWIR-010Carry a spareMilling drum gearbox oilDrum drive gearboxWIR-016Carry a spareAir filter elementEngine intake
You Might Also Consider
Related Machines
Also for hireWirtgen · Cold Milling Machines
Wirtgen W 100 R
Also available as W 50 R, W 120 R, W 60 R
- 1,000 mm
- Milling Width
- 14,700 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power
Wirtgen · Cold Milling Machines
Wirtgen W 120 R
Also available as W 50 R, W 100 R, W 60 R
- 1,200 mm
- Milling Width
- 15,350 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power