Also for hireWirtgen · Cold Milling Machines
Wirtgen W 100 R
Also available as W 50 R, W 120 R, W 60 R
- 1,000 mm
- Milling Width
- 14,700 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power
Cold milling machine removing an asphalt layer from a road
Wirtgen W 100 HR
The Wirtgen W 100 HR is a compact-class cold milling machine featuring a high-discharge conveyor for direct loading onto trucks, a durable tracked undercarriage, and a precision milling drum designed for efficient asphalt and concrete surface removal on medium-scale road rehabilitation projects.
- 1,000 mm
- Milling Width
- 13,600 kg
- Operating Weight
- 200 mm
- Max Milling Depth
- 155 kW
- Engine Power
Talk to a specialist
Add W 100 HR and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Wirtgen W HR Series
4 builds, differing by milling width and duty
Milling Width: 500 mm, 1,000 mm, 1,300 mm, 500 mm. Operating Weight: 5,750 kg, 13,600 kg, 14,100 kg, 6,800 kg
1,000 mm width at high advance rate
Built for surface layer and RAP removal
Shorter lane closures on resurfacing
155 kW engine
The Wirtgen W 100 HR is a compact-class cold milling machine featuring a high-discharge conveyor for direct loading onto trucks, a durable tracked undercarriage, and a precision milling drum designed for efficient asphalt and concrete surface removal on medium-scale road rehabilitation projects.
Where the W 100 R is built to go deep, the W 100 HR is built to clear area. On resurfacing contracts the constraint is usually the traffic window rather than the depth, and this machine is specified for exactly that.
Key Features
- 1,000 mm width at high advance rate
- Built for surface layer and RAP removal
- Shorter lane closures on resurfacing
- 155 kW engine
At a Glance
- Milling Width
- 1,000 mm
- Operating Weight
- 13,600 kg
- Max Milling Depth
- 200 mm
- Engine Power
- 155 kW
About Wirtgen: Cold milling machines for surface layer removal, full depth rehabilitation and fine milling, supplied through Wirtgen India.
View the full Wirtgen rangeFull technical data for the W 100 HR. These figures also power the catalogue filters, so what you filter on is what is shown here.
Engine & Power
| Engine Power (kW) | 155 kW |
|---|---|
| Emission Standard | CEV Stage V |
Weight & Dimensions
| Operating Weight (kg) | 13,600 kg |
|---|
Milling Performance
| Milling Width (mm) | 1,000 mm |
|---|---|
| Max Milling Depth (mm) | 200 mm |
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Road Rehabilitation
Best matchMilling out failed layers and rebuilding existing roads, including cold recycling in place.
94% fit
Urban Roads & Streets
Strong matchCity streets, lanes and confined urban sites where compact machines and manoeuvrability matter more than output.
80% fit
Highway Construction
SuitableNew national highway alignments and multi-lane carriageways requiring high output paving and compaction.
72% fit
Documentation for the W 100 HR. The spec sheet is generated from the same data as this page, so it can never contradict it.
W 100 HR Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the W 100 HR, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
WIR-017Carry a spareDrive belt set, engine to pumpEngine to hydraulic pump transmissionWIR-020Carry a spareChassis grease, lithium EP2Drum lift, tracks, chassis linkageWIR-012Carry a spareEngine oil, 15W-40 dieselDiesel engine, per service intervalWIR-015Carry a spareHydraulic oil, HVLP 46Propulsion, levelling and drum lift hydraulicsWIR-010Carry a spareMilling drum gearbox oilDrum drive gearboxWIR-016Carry a spareAir filter elementEngine intake
You Might Also Consider
Related Machines
Also for hire
Wirtgen · Cold Milling Machines
Wirtgen W 120 R
Also available as W 50 R, W 100 R, W 60 R
- 1,200 mm
- Milling Width
- 15,350 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power
Wirtgen · Cold Milling Machines
Wirtgen W 130 HR
Also available as W 50 HR, W 100 HR, W 55 HR
- 1,300 mm
- Milling Width
- 14,100 kg
- Operating Weight
- 200 mm
- Max Milling Depth
- 155 kW
- Engine Power