Wirtgen · Cold Milling Machines
Wirtgen W 100 HR
Also available as W 50 HR, W 130 HR, W 55 HR
- 1,000 mm
- Milling Width
- 13,600 kg
- Operating Weight
- 200 mm
- Max Milling Depth
- 155 kW
- Engine Power
A front-angled shot of the W 130 HR on a job site, highlighting its operator platform, control console, and the machine's compact yet powerful build for medium-to-large milling operations.
Wirtgen W 130 HR
The widest of the high performance rear loaders at 1,300 mm, for the most productive layer removal in the small class.
- 1,300 mm
- Milling Width
- 14,100 kg
- Operating Weight
- 200 mm
- Max Milling Depth
- 155 kW
- Engine Power
Talk to a specialist
Add W 130 HR and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Wirtgen W HR Series
4 builds, differing by milling width and duty
Milling Width: 500 mm, 1,000 mm, 1,300 mm, 500 mm. Operating Weight: 5,750 kg, 13,600 kg, 14,100 kg, 6,800 kg
1,300 mm width, widest in the small class
Highest area output before compact class
Fewer passes per lane on resurfacing
Transports without dismantling
The widest of the high performance rear loaders at 1,300 mm, for the most productive layer removal in the small class.
The largest drum available before moving to a compact front loader. On wide resurfacing work it clears a lane in fewer passes than any other machine in the small class, while still transporting without dismantling.
Key Features
- 1,300 mm width, widest in the small class
- Highest area output before compact class
- Fewer passes per lane on resurfacing
- Transports without dismantling
At a Glance
- Milling Width
- 1,300 mm
- Operating Weight
- 14,100 kg
- Max Milling Depth
- 200 mm
- Engine Power
- 155 kW
About Wirtgen: Cold milling machines for surface layer removal, full depth rehabilitation and fine milling, supplied through Wirtgen India.
View the full Wirtgen rangeFull technical data for the W 130 HR. These figures also power the catalogue filters, so what you filter on is what is shown here.
Engine & Power
| Engine Power (kW) | 155 kW |
|---|---|
| Emission Standard | CEV Stage V |
Weight & Dimensions
| Operating Weight (kg) | 14,100 kg |
|---|
Milling Performance
| Milling Width (mm) | 1,300 mm |
|---|---|
| Max Milling Depth (mm) | 200 mm |
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Road Rehabilitation
Best matchMilling out failed layers and rebuilding existing roads, including cold recycling in place.
95% fit
Highway Construction
Strong matchNew national highway alignments and multi-lane carriageways requiring high output paving and compaction.
78% fit
Documentation for the W 130 HR. The spec sheet is generated from the same data as this page, so it can never contradict it.
W 130 HR Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the W 130 HR, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
WIR-017Carry a spareDrive belt set, engine to pumpEngine to hydraulic pump transmissionWIR-020Carry a spareChassis grease, lithium EP2Drum lift, tracks, chassis linkageWIR-012Carry a spareEngine oil, 15W-40 dieselDiesel engine, per service intervalWIR-015Carry a spareHydraulic oil, HVLP 46Propulsion, levelling and drum lift hydraulicsWIR-010Carry a spareMilling drum gearbox oilDrum drive gearboxWIR-016Carry a spareAir filter elementEngine intake
You Might Also Consider
Related Machines
Also for hireWirtgen · Cold Milling Machines
Wirtgen W 100 R
Also available as W 50 R, W 120 R, W 60 R
- 1,000 mm
- Milling Width
- 14,700 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power
Wirtgen · Cold Milling Machines
Wirtgen W 120 R
Also available as W 50 R, W 100 R, W 60 R
- 1,200 mm
- Milling Width
- 15,350 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power