Wirtgen · Cold Milling Machines
Wirtgen W 100 HR
Also available as W 50 HR, W 130 HR, W 55 HR
- 1,000 mm
- Milling Width
- 13,600 kg
- Operating Weight
- 200 mm
- Max Milling Depth
- 155 kW
- Engine Power
Wirtgen W 60 R small-class cold milling machine, featuring a compact tracked chassis, 600 mm milling drum, and conveyor system designed for precision milling in tight or narrow work areas.
Wirtgen W 60 R
The 600 mm drum version of the W 50 R, covering slightly larger patch and repair work at the same depth.
- 600 mm
- Milling Width
- 7,450 kg
- Operating Weight
- 210 mm
- Max Milling Depth
- 100 kW
- Engine Power
Talk to a specialist
Add W 60 R and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Wirtgen W R Series
4 builds, differing by milling width
Milling Width: 500 mm, 1,000 mm, 1,200 mm, 600 mm. Operating Weight: 6,930 kg, 14,700 kg, 15,350 kg, 7,450 kg
600 mm milling width
Same 210 mm depth capability as the W 50 R
Fewer passes on wider patches
Edge milling retained
The 600 mm drum version of the W 50 R, covering slightly larger patch and repair work at the same depth.
Identical in concept to the W 50 R with a wider drum, so a patch is covered in fewer passes. The choice between them is simply how much width the typical job needs, since depth, power and handling are the same.
Key Features
- 600 mm milling width
- Same 210 mm depth capability as the W 50 R
- Fewer passes on wider patches
- Edge milling retained
At a Glance
- Milling Width
- 600 mm
- Operating Weight
- 7,450 kg
- Max Milling Depth
- 210 mm
- Engine Power
- 100 kW
About Wirtgen: Cold milling machines for surface layer removal, full depth rehabilitation and fine milling, supplied through Wirtgen India.
View the full Wirtgen rangeFull technical data for the W 60 R. These figures also power the catalogue filters, so what you filter on is what is shown here.
Engine & Power
| Engine Power (kW) | 100 kW |
|---|---|
| Emission Standard | CEV Stage V |
Weight & Dimensions
| Operating Weight (kg) | 7,450 kg |
|---|
Milling Performance
| Milling Width (mm) | 600 mm |
|---|---|
| Max Milling Depth (mm) | 210 mm |
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Road Rehabilitation
Best matchMilling out failed layers and rebuilding existing roads, including cold recycling in place.
92% fit
Urban Roads & Streets
Strong matchCity streets, lanes and confined urban sites where compact machines and manoeuvrability matter more than output.
88% fit
Documentation for the W 60 R. The spec sheet is generated from the same data as this page, so it can never contradict it.
W 60 R Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the W 60 R, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
WIR-017Carry a spareDrive belt set, engine to pumpEngine to hydraulic pump transmissionWIR-020Carry a spareChassis grease, lithium EP2Drum lift, tracks, chassis linkageWIR-012Carry a spareEngine oil, 15W-40 dieselDiesel engine, per service intervalWIR-015Carry a spareHydraulic oil, HVLP 46Propulsion, levelling and drum lift hydraulicsWIR-010Carry a spareMilling drum gearbox oilDrum drive gearboxWIR-016Carry a spareAir filter elementEngine intake
You Might Also Consider
Related Machines
Also for hireWirtgen · Cold Milling Machines
Wirtgen W 100 R
Also available as W 50 R, W 120 R, W 60 R
- 1,000 mm
- Milling Width
- 14,700 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power
Wirtgen · Cold Milling Machines
Wirtgen W 120 R
Also available as W 50 R, W 100 R, W 60 R
- 1,200 mm
- Milling Width
- 15,350 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power