Wirtgen · Cold Milling Machines
Wirtgen W 100 HR
Also available as W 50 HR, W 130 HR, W 55 HR
- 1,000 mm
- Milling Width
- 13,600 kg
- Operating Weight
- 200 mm
- Max Milling Depth
- 155 kW
- Engine Power
A detailed side profile of the Wirtgen W 200 cold milling machine, showcasing its large milling drum, conveyor system, and rugged tracked undercarriage built for high-performance road surface removal.
Wirtgen W 200 P
Large highway scale cold milling machine for complete pavement removal at the highest production rates.
- 2,000 mm
- Milling Width
- 28,640 kg
- Operating Weight
- 330 mm
- Max Milling Depth
- 455 kW
- Engine Power
Talk to a specialist
Add W 200 P and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Highway scale complete removal
455 kW maintains rate in hard material
Highest production in the range
Full depth pavement structure removal
Large highway scale cold milling machine for complete pavement removal at the highest production rates.
The largest machine in the India range, specified where the whole pavement structure comes out and the programme is measured in kilometres rather than metres. At 455 kW it maintains advance rate through hard aged asphalt and lightly bound bases that would stall a smaller machine.
Key Features
- Highway scale complete removal
- 455 kW maintains rate in hard material
- Highest production in the range
- Full depth pavement structure removal
At a Glance
- Milling Width
- 2,000 mm
- Operating Weight
- 28,640 kg
- Max Milling Depth
- 330 mm
- Engine Power
- 455 kW
About Wirtgen: Cold milling machines for surface layer removal, full depth rehabilitation and fine milling, supplied through Wirtgen India.
View the full Wirtgen rangeFull technical data for the W 200 P. These figures also power the catalogue filters, so what you filter on is what is shown here.
Engine & Power
| Engine Power (kW) | 455 kW |
|---|---|
| Emission Standard | CEV Stage V |
Weight & Dimensions
| Operating Weight (kg) | 28,640 kg |
|---|
Milling Performance
| Milling Width (mm) | 2,000 mm |
|---|---|
| Max Milling Depth (mm) | 330 mm |
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Road Rehabilitation
Best matchMilling out failed layers and rebuilding existing roads, including cold recycling in place.
98% fit
Highway Construction
Best matchNew national highway alignments and multi-lane carriageways requiring high output paving and compaction.
94% fit
Documentation for the W 200 P. The spec sheet is generated from the same data as this page, so it can never contradict it.
W 200 P Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the W 200 P, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
WIR-017Carry a spareDrive belt set, engine to pumpEngine to hydraulic pump transmissionWIR-020Carry a spareChassis grease, lithium EP2Drum lift, tracks, chassis linkageWIR-012Carry a spareEngine oil, 15W-40 dieselDiesel engine, per service intervalWIR-015Carry a spareHydraulic oil, HVLP 46Propulsion, levelling and drum lift hydraulicsWIR-010Carry a spareMilling drum gearbox oilDrum drive gearboxWIR-016Carry a spareAir filter elementEngine intake
You Might Also Consider
Related Machines
Also for hireWirtgen · Cold Milling Machines
Wirtgen W 100 R
Also available as W 50 R, W 120 R, W 60 R
- 1,000 mm
- Milling Width
- 14,700 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power
Wirtgen · Cold Milling Machines
Wirtgen W 120 R
Also available as W 50 R, W 100 R, W 60 R
- 1,200 mm
- Milling Width
- 15,350 kg
- Operating Weight
- 300 mm
- Max Milling Depth
- 155 kW
- Engine Power