The Aptech DMP 60 is a semi-automatic stationary asphalt drum mix plant with a 60 tph capacity, featuring an integrated dryer/mixer drum, aggregate cold feed bins, and bitumen storage system, designed for efficient hot-mix asphalt production for industrial and road construction applications.
Aptec DMP 60
The largest DMP build at 60 tonnes per hour, for contractors running two paving crews or longer daily runs.
- 60 t/h
- Output Capacity
Talk to a specialist
Add DMP 60 and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Aptec DMP Series
3 builds, differing by rated output
Output Capacity: 45 t/h, 50 t/h, 60 t/h
Rated at 60 tonnes per hour
Keeps a paving train supplied through the day
Continuous drum mixing
Largest build in the DMP range
The largest DMP build at 60 tonnes per hour, for contractors running two paving crews or longer daily runs.
At 60 tonnes per hour the plant keeps a paving train working through the day rather than pausing for mix, which is usually what pushes a contractor from the smaller builds to this one.
Key Features
- Rated at 60 tonnes per hour
- Keeps a paving train supplied through the day
- Continuous drum mixing
- Largest build in the DMP range
At a Glance
- Output Capacity
- 60 t/h
About Aptec: Sensor paver finishers, mechanical paver finishers, kerb pavers, drum mix and wet mix macadam plants, manufactured at Mehsana, Gujarat.
View the full Aptec rangeFull technical data for the DMP 60. These figures also power the catalogue filters, so what you filter on is what is shown here.
Capacity & Output
| Output Capacity (t/h) | 60 t/h |
|---|
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Asphalt Production
Strong matchProducing hot mix on or near the project site, including plants that relocate between contracts.
88% fit
Urban Roads & Streets
Strong matchCity streets, lanes and confined urban sites where compact machines and manoeuvrability matter more than output.
84% fit
Highway Construction
SuitableNew national highway alignments and multi-lane carriageways requiring high output paving and compaction.
72% fit
Documentation for the DMP 60. The spec sheet is generated from the same data as this page, so it can never contradict it.
DMP 60 Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the DMP 60, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
PKR-007Carry a spareDryer drum drive gearbox oilDryer drum rotation drivePKR-034Carry a spareGrease, high temperature lithium complexDryer drum trunnions, elevator, conveyor bearingsPKR-008Carry a spareBaghouse filter bagCassette type bag filter unit, reverse air cleaningPKR-003Carry a spareBurner fuel filterBurner fuel oil supply linePKR-025Carry a spareThermic fluid heater filterThermic hot oil heating system, where fittedPKR-021Wear partBitumen spray bar nozzleBitumen discharge spray bar across the paddle mixer
You Might Also Consider
