The Aptec DMP 50 is a stationary asphalt drum mixing plant with a 50 tph capacity, featuring an integrated dryer/mixer drum, aggregate feeding system, and bitumen storage, designed for efficient, continuous hot-mix asphalt production on road construction projects.
Aptec DMP 50
The 50 tonne per hour build of the DMP range, a step up in output on the same plant layout.
- 50 t/h
- Output Capacity
Talk to a specialist
Add DMP 50 and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Aptec DMP Series
3 builds, differing by rated output
Output Capacity: 45 t/h, 50 t/h, 60 t/h
Rated at 50 tonnes per hour
Same layout as the DMP 45
Continuous drum mixing
One operating routine across the range
The 50 tonne per hour build of the DMP range, a step up in output on the same plant layout.
Same plant, more throughput. The choice between the DMP builds is simply how much a day's paving needs, since the layout, the erection work and the operating routine do not change between them.
Key Features
- Rated at 50 tonnes per hour
- Same layout as the DMP 45
- Continuous drum mixing
- One operating routine across the range
At a Glance
- Output Capacity
- 50 t/h
About Aptec: Sensor paver finishers, mechanical paver finishers, kerb pavers, drum mix and wet mix macadam plants, manufactured at Mehsana, Gujarat.
View the full Aptec rangeFull technical data for the DMP 50. These figures also power the catalogue filters, so what you filter on is what is shown here.
Capacity & Output
| Output Capacity (t/h) | 50 t/h |
|---|
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Urban Roads & Streets
Strong matchCity streets, lanes and confined urban sites where compact machines and manoeuvrability matter more than output.
86% fit
Asphalt Production
Strong matchProducing hot mix on or near the project site, including plants that relocate between contracts.
86% fit
Road Rehabilitation
Strong matchMilling out failed layers and rebuilding existing roads, including cold recycling in place.
80% fit
Documentation for the DMP 50. The spec sheet is generated from the same data as this page, so it can never contradict it.
DMP 50 Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the DMP 50, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
PKR-007Carry a spareDryer drum drive gearbox oilDryer drum rotation drivePKR-034Carry a spareGrease, high temperature lithium complexDryer drum trunnions, elevator, conveyor bearingsPKR-008Carry a spareBaghouse filter bagCassette type bag filter unit, reverse air cleaningPKR-003Carry a spareBurner fuel filterBurner fuel oil supply linePKR-025Carry a spareThermic fluid heater filterThermic hot oil heating system, where fittedPKR-021Wear partBitumen spray bar nozzleBitumen discharge spray bar across the paddle mixer
You Might Also Consider
