Also for hireHamm · Soil Compactors
Hamm HC 100
Also available as HC 119i, HC 119iD, HC 139iD
- 10,450 kg
- Operating Weight
- 2,140 mm
- Drum Width
HC series soil compactors
Hamm HC 119iD
Heavier ballast build of the HC 119i, adding static load for denser soils that resist vibration alone.
- 11,240 kg
- Operating Weight
- 2,140 mm
- Drum Width
- 74 kW
- Engine Power
Talk to a specialist
Add HC 119iD and any other machines to one enquiry. We do not publish prices, our team will call you to discuss specification.
Hamm HC Series
4 builds, differing by class and ballast
Operating Weight: 11,190 kg, 10,450 kg, 11,240 kg, 13,160 kg. Engine Power: 74 kW, Not applicable, 74 kW, Not applicable
Additional static load over the HC 119i
For denser and cohesive materials
Same 74 kW Ashok Leyland driveline
Fewer passes on resistant soils
Heavier ballast build of the HC 119i, adding static load for denser soils that resist vibration alone.
Mechanically the HC 119i with additional ballast. Some cohesive and densely graded materials respond to static load more than to vibration, and on those the extra mass is what achieves the specified density rather than more passes.
Key Features
- Additional static load over the HC 119i
- For denser and cohesive materials
- Same 74 kW Ashok Leyland driveline
- Fewer passes on resistant soils
At a Glance
- Operating Weight
- 11,240 kg
- Drum Width
- 2,140 mm
- Engine Power
- 74 kW
About Hamm: Soil compactors and tandem rollers, with the HC and HD series built at the Wirtgen Group plant in Pune and homologised for the region.
View the full Hamm rangeFull technical data for the HC 119iD. These figures also power the catalogue filters, so what you filter on is what is shown here.
Engine & Power
| Engine Manufacturer | Ashok Leyland |
|---|---|
| Engine Power (kW) | 74 kW |
| Emission Standard | CEV Stage V |
Weight & Dimensions
| Operating Weight (kg) | 11,240 kg |
|---|
Compaction Performance
| Drum Width (mm) | 2,140 mm |
|---|---|
| Compaction System | Vibration |
Specifications are indicative and subject to confirmation against the current datasheet. Contact our team for available options and configurations.
How well this machine suits each type of work, rated by our team rather than derived from a generic rule.
Earthworks & Embankments
Best matchSubgrade preparation, fill compaction and embankment building ahead of surfacing.
94% fit
Highway Construction
Strong matchNew national highway alignments and multi-lane carriageways requiring high output paving and compaction.
88% fit
Hydropower Projects
Strong matchAccess roads, dam works and embankments on hydropower sites, often at altitude and on steep gradients.
82% fit
Building Construction
SuitableHousing, commercial and institutional buildings, where concrete is batched or mixed on site and the constraint is access rather than output.
62% fit
The service schedule for the Hamm HC Series, by hour meter reading. Every build in the family shares it. Our service team carries these out, and the parts each one needs are held in Kathmandu.
- 150 hHydraulic filter change
- 2250 hEngine service
- 3500 hEngine service and gear oil
- 4750 hEngine service
- 51,000 hEngine oil, gear oil and hydraulic oil filter change
Readings are the manufacturer's intervals. Dust, gradient and duty cycle all shorten them in practice, so treat these as the latest a service should happen rather than the earliest.
Book a serviceDocumentation for the HC 119iD. The spec sheet is generated from the same data as this page, so it can never contradict it.
HC 119iD Specification Sheet
Branded, print ready, always current. Opens in the browser and saves as PDF.
Ask us for any document you need and we will send it directly.
Keep it running
Recommended Spare Parts
The parts most often needed for the HC 119iD, ordered by how quickly their wear stops the machine. Add any of them to the same enquiry as the machine.
HAM-S-014Carry a spareChassis grease, lithium EP2Articulation, drum bearings, steeringHAM-S-002Carry a spareEngine oil, 15W-40 dieselDeutz or Cummins engine, per service intervalHAM-S-011Carry a spareFinal drive gearbox oilDrum and axle final drive gearboxesHAM-S-005Carry a spareHydraulic oil, HVLP 46Propulsion, steering and vibration hydraulicsHAM-S-006Carry a spareAir filter elementEngine intakeHAM-S-001Carry a spareEngine oil filterAll Hamm soil compactor diesel engines
You Might Also Consider
Related Machines
Also for hire
Also for hireHamm · Soil Compactors
Hamm HC 119i
Also available as HC 100, HC 119iD, HC 139iD
- 11,190 kg
- Operating Weight
- 2,140 mm
- Drum Width
- 74 kW
- Engine Power
Hamm · Soil Compactors
Hamm HC 139iD
Also available as HC 119i, HC 100, HC 119iD
- 13,160 kg
- Operating Weight
- 2,140 mm
- Drum Width